







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Backsplash Installation Cost in Coral Gables?
Backsplash installation in Coral Gables typically runs $800 to $2,500 for most kitchens, and the final number depends on the square footage, the tile or slab you choose, and how much prep the wall needs. A straightforward ceramic tile splash for a standard run of cabinets usually lands near the low end, while a full-height stone slab behind the range pushes toward the top. We give a written estimate before any work starts, and that estimate sets the final price.
That range covers the whole job for a typical Coral Gables kitchen: surface prep, waterproofing, setting material, grout, and cleanup. It isn’t a per-tile price or a labor-only quote, and it doesn’t assume you’ve already bought the material. If you’re pairing the backsplash with new counters or cabinets, the numbers shift, which is why we quote the whole scope together rather than one piece at a time. Call (844) 797-9523 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Key Takeaways
- Most Coral Gables backsplash jobs fall between $800 and $2,500.
- Tile is usually the budget-friendly route; full slab stone runs higher.
- Wall prep and outlet cutouts are the two items most likely to move the price.
- A written, itemized estimate is free, and it sets the final price.
- Our technicians have up to 12 years of experience reading walls and matching materials.

Backsplash Installation Cost Breakdown (2026)
Here’s how a typical backsplash project breaks down for the Coral Gables market. These are estimated ranges, not a menu of fixed prices. The material you pick and the condition of the wall behind the cabinets both move the line items up or down, so treat this as a planning tool and let the written estimate give you the real figure.
| Line Item | Typical Estimated Range |
|---|---|
| Standard ceramic or porcelain tile backsplash | $800 – $1,400 |
| Glass or mosaic tile backsplash | $1,200 – $1,900 |
| Natural stone tile (marble, travertine) backsplash | $1,400 – $2,200 |
| Full slab stone or quartz backsplash | $1,800 – $2,500 |
| Wall prep and waterproofing | Included to modest add-on, priced per job |
| Outlet and switch cutouts | Priced per job in the estimate |
| Old backsplash removal and disposal | Priced per job in the estimate |
The big driver is material. Ceramic tile is inexpensive and forgiving, glass and mosaic cost more to set because the pieces are small and the layout needs care, and natural stone varies widely from tile to tile. A full slab behind the range is a different job again, since it’s cut and finished like a countertop rather than laid piece by piece. On top of material, the condition of the wall does the most to change the total. A flat, sound drywall surface sets quickly. A wall that’s out of plumb, has soft spots, or hides old adhesive takes more time to bring to a surface the tile will actually sit flat on.
If you’re remodeling the whole kitchen and not just the splash, it helps to see how the backsplash fits the larger budget. A full kitchen remodel in Coral Gables generally runs $14,000 to $45,000, and a smaller scope lands around $9,000 to $20,000. Backsplash work sits inside those numbers, and it’s one of the last things to go in, after cabinets and countertops are set. It’s also worth comparing the $2,000 to $6,500 range for countertop installation, since the two surfaces meet at the same seam and the material choice usually carries across both.
What Affects Backsplash Installation Pricing in Coral Gables
Two kitchens of the same size can quote very differently. These are the factors that move the number most, and they’re the ones we look at first when we walk a kitchen.
- Wall condition and prep. Coral Gables homes span a wide range of construction, from older masonry walls to newer framed additions, and each one surfaces differently. A wall that needs patching, leveling, or new waterproofing adds labor before a single tile goes up. On a wet wall behind the sink, we don’t skip waterproofing, because a splash that fails at the seams is a much bigger problem later. This is one of the most common reasons a quote lands above the bottom of the range.
- Tile size and layout. Large-format tile sets faster per square foot but needs flatter walls and more careful cutting around outlets. Small mosaic or glass needs more setting time and grout work. A herringbone, chevron, or offset pattern takes longer than a straight stack because every cut has to line up. Pattern complexity is a real cost, and it’s worth knowing before you fall for a layout photo.
- Material choice. Ceramic and porcelain sit at the low end. Glass, mosaic, and natural stone cost more in both material and handling. A full slab of quartz or stone behind the range is priced and finished like a countertop, so it lands near the top of the range.
- Height and coverage. A standard backsplash runs from the counter to the underside of the upper cabinets. Taking the tile to the ceiling, wrapping a full wall, or running behind a window or hood adds square footage and cutting. Full-height coverage on one wall can nearly double the tile area on that run.
- Outlets, switches, and fixtures. Every outlet and switch in the splash needs a precise cutout, and each one adds time. Under-cabinet lighting, a pot filler, or a new range hood adds coordination with the electrical and plumbing work, which we handle as part of a kitchen remodel rather than handing you off to another trade.
- Removal of the old splash. If there’s an existing backsplash to take out, that’s demolition, disposal, and often wall repair. A splash set over drywall can come away cleanly; one bonded to a masonry wall can take the surface with it. We price removal into the estimate so there are no surprises mid-job.

How to Save on Backsplash Installation
The best way to keep a backsplash budget in check is to make material and layout decisions before the estimate, not during the install. Here’s what actually moves the number down.
- Choose your tile before we quote. Material is the biggest variable. Seeing the actual tile, its size, and its layout lets us price labor accurately. A quote based on a rough idea is a guess, and guesses get revised.
- Keep the pattern simple where you can. A straight stack or simple running bond sets faster and cuts cleaner than a diagonal or herringbone layout. If you love a complex pattern, use it as a focal point behind the range and keep the rest simple.
- Stay at standard height. Tiling to the underside of the uppers costs less than running to the ceiling. If you want the taller look, plan for it in the estimate rather than adding it later.
- Pair the backsplash with counters or cabinets. When the countertop and backsplash go in as one scope, the seams get planned together and the scheduling is tighter. That’s one of the practical advantages of working with a multi-trade contractor. We handle Coral Gables Construction as a full-scope residential contractor, from the driveway to the roofline, so the kitchen trades work off one plan.
- Get the estimate in writing and itemized. A clear breakdown of material, labor, prep, and removal shows you exactly where the money goes. Estimates are free, so call (844) 797-9523 and we’ll walk your kitchen and put numbers to it. We answer 24/7, with fast dispatch from 7am to 7pm.
One thing we won’t do to save money is skip waterproofing or set tile over a wall that isn’t sound. A backsplash that fails at the grout lines or the counter seam is a repair that costs more than doing it right the first time. Our technicians have up to 12 years of experience, and they’ll tell you honestly when a wall needs prep before it’s ready for tile.
Backsplash Materials and What They Cost
Material is where most of the price difference lives. Each option has a personality, and the right one depends on how much traffic your kitchen sees and how the rest of the room is finished.
Ceramic and porcelain tile are the workhorses. They’re easy to clean, come in a huge variety of shapes, and keep the job near the low end of the range. Porcelain is denser and holds up well in a busy kitchen. Glass and mosaic tile bring light and color, and they’re popular behind a range or sink where a little shine goes a long way. They cost more to set because the pieces are small and the layout shows every mistake. Natural stone like marble or travertine adds depth and warmth, but it needs sealing and a little more care. It sits higher in the range, and the look is hard to match with anything else.
A full slab backsplash in quartz or stone is the most finished look and the top of the range. It’s cut and installed like a countertop, so the seams and edges match. If you’re already choosing a countertop material, it’s worth pricing the splash in the same material at the same time. Our countertop lineup includes Cambria, Silestone, and Caesarstone, and seeing the actual slab against your cabinets beats guessing from a sample chip. If you’re planning a larger kitchen update, our kitchen remodeling page shows how cabinets, counters, and backsplash fit together, and our cabinet installation service covers the phase that comes right before the splash goes up.
What Does a Backsplash Installation Job Involve?
A backsplash looks simple, but a clean installation is a sequence of steps, and each one matters if the finished wall is going to last.
- Walk and measure. We measure the run, check the wall for flatness and soundness, and confirm the layout and tile choice. This is when the estimate gets specific.
- Prep the wall. Remove the old splash if there is one, patch and level the surface, and apply waterproofing on the wet walls. This step is invisible when it’s done and obvious when it isn’t.
- Plan the layout. Mark the tile lines, center the pattern on the range or sink, and plan the cuts around outlets and edges so the finished wall looks intentional.
- Set the tile. Apply the setting material, set the tile, and keep the joints even. Spacers and careful checking keep the lines true.
- Grout and seal. Grout the joints, clean the surface, and seal where the material calls for it.
- Finish and clean up. Reinstall outlet covers, caulk the seams at the counter and cabinets, and leave the kitchen clean.
The order matters. Backsplash goes in after cabinets and counters, and the electrical work behind it is finished first. If your kitchen is mid-remodel, we schedule the trades so the splash goes in once the surfaces around it are final. That’s where working with one contractor pays off: the cabinet installer, the countertop fabricator, and the tile setter are all working from the same plan. If you’re considering new counters before the splash, our countertop installation page covers that scope, and if your kitchen layout is changing, a kitchen island installation often comes before the final tile work.
Safety and Code Notes for Coral Gables Kitchens
Most backsplash work is finish work, but a few pieces deserve care. Any cutout near an outlet or switch involves the electrical circuit, so we shut the power down before the tile saw comes near the wall and coordinate with a licensed electrician when a circuit needs to move. Waterproofing behind a sink or range isn’t optional for us, because a leak that gets behind a splash is a slow problem. And if your tile selection involves a natural stone that needs sealing, ask about the sealer and the schedule. Most cities require a permit for work that moves plumbing or electrical in a kitchen, so check with your city’s building department before you start, and we’ll tell you what your scope likely triggers.
Working With a Multi-Trade Contractor on Your Kitchen
A backsplash is rarely the only thing a Coral Gables homeowner is thinking about. It’s usually part of a kitchen refresh, a countertop swap, or a larger remodel, and each of those has its own trades. One contractor, every trade, means the same team that sets your cabinets can coordinate the counters, the electrical, and the tile without you managing three separate schedules.
We work across seven distinct service categories, from driveway and pavers to home additions and ADUs, and the kitchen sits inside that range. For the kitchen specifically, we specify by name, not by category. Cabinets come from KraftMaid and Wellborn. Fixtures come from Kohler, Toto, and Grohe, with Schluter systems doing the waterproofing work behind the tile. On the surface side, Cambria, Silestone, and Caesarstone give you genuine apples-to-apples comparisons rather than a single take-it-or-leave-it slab. When your project grows into an addition or more square footage, we bring both custom construction and vetted prefab systems, including Abodu, Dvele, Mighty Buildings, and Boxabl. Bring your addition plans, or let us build the case for one.
For homeowners working through several upgrades at once, the breadth matters. Our bathroom remodeling page covers the other room where tile choices carry across surfaces, and our home additions and ADUs service handles the projects that add livable space rather than just finish it. If your exterior is on the list too, our roofing and windows and doors services work off the same plan. And when the driveway or patio needs attention before guests see the new kitchen, our driveway and pavers service and fence installation service round out the property.
FAQs – Backsplash Installation Cost
How much does backsplash installation cost in Coral Gables?
Backsplash installation in Coral Gables typically costs $800 to $2,500 for most kitchens. Ceramic tile lands near the low end, glass and natural stone run in the middle, and a full slab stone splash pushes toward the top. The written estimate sets the final price. Call (844) 797-9523 for a free estimate.
Is it cheaper to install a tile backsplash or a full slab?
Tile is usually cheaper, with most ceramic or porcelain jobs landing around $800 to $1,400, while full slab stone generally runs $1,800 to $2,500. A slab gives you a seamless look with no grout lines, so the choice comes down to budget versus finish. We price both so you can compare side by side. Call (844) 797-9523 for a free estimate.
How long does backsplash installation take?
Most Coral Gables backsplash jobs take one to three days, depending on square footage, material, and how much wall prep is needed. Tile sets and grouts in stages, so the surface is often ready for light use the same week. A full slab behind the range takes longer because it’s cut and finished like a countertop. Call (844) 797-9523 to schedule a walk-through.
Do I need to remove the old backsplash first?
Usually yes, and removal is priced into the estimate. Setting new tile over an old splash rarely holds up, and the old surface can hide wall damage that needs fixing. We take out the old splash, repair the wall, and prep the surface before the new tile goes up. Call (844) 797-9523 for a free estimate.
Can I get a backsplash installed the same day?
Same-day installation is possible for a small, straightforward tile splash on a sound wall, though most jobs are scheduled over a day or two so the prep and grout cure properly. Material and wall condition decide the timeline. Call (844) 797-9523, and we’ll tell you what your kitchen needs. We answer 24/7, with fast dispatch from 7am to 7pm.
Get a Free Backsplash Estimate in Coral Gables
The number that matters is the one on your written estimate, and getting there is free. We’ll measure your kitchen, look at the wall behind the cabinets, and price the material and labor line by line so you can see exactly where the $800 to $2,500 range lands for your project. If the backsplash is part of a larger kitchen update, we quote the whole scope together, cabinets and counters and tile, so the schedule and the seams line up. Our technicians have up to 12 years of experience, we’re licensed and insured, and we stand behind the work with a satisfaction guarantee.
Call (844) 797-9523 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Coral Gables market as of 2026. Coral Gables Construction offers free estimates – call (844) 797-9523.
Written by the team at Coral Gables Construction.
What Our Customers Say
"The framing was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
- Amanda Barrett"Weekly site meeting, every week, with a written summary afterward. I always knew where the money and the schedule stood."
- Holly Bennett"He was upfront about a soil issue that added cost early rather than absorbing it and surprising us at the end."
- Yolanda Salazar












