







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Coral Gables Homeowners
A fence in Coral Gables has to do two jobs at once: mark a property line cleanly and hold up through a wet season that drops heavy rain in short bursts, followed by months of strong sun. That combination is hard on posts, fasteners, and finishes, and it’s why fence work here is less about picking a panel style and more about footing depth, drainage, and materials that don’t swell, warp, or fade. Our technicians have up to 12 years of experience setting posts and hanging gates in South Florida soil, and we handle fencing as one of seven trades under one contractor, so you’re not chasing a fence crew, then a paver crew, then someone else for the gate hardware. Call (844) 797-9523 to schedule your free estimate. We answer 24/7.
What Our Fence Installation Service Includes
Every fence project starts with a walk of the property line, a conversation about what the fence needs to do (privacy, pets, pool safety, curb presence), and a written line-item estimate before anything gets dug. Below is what each type of fence work involves and when Coral Gables homeowners usually call for it.
Wood Fence
Wood fencing is the classic privacy option, built from posts, rails, and pickets or panels, and it’s the right call when you want a warm look, a specific height, and the ability to match an existing home style. Homeowners usually need it when an old fence has gone soft at the base, when a new pool or addition changes the yard layout, or when they’re replacing a failing fence along a shared line. We set posts to the depth the soil and gate load require, use galvanized or stainless fasteners suited to our humidity, and build gates with proper bracing so they don’t sag within a season.

Chain Link Fence
Chain link is the practical choice for enclosures, side yards, and property lines where visibility and cost control matter more than privacy. It’s usually specified for pet containment, separating a service area from the yard, or securing a corner lot. We frame it with Master Halco components, tension it correctly so the mesh doesn’t sag, and finish the terminal posts and gates so the whole run holds its shape.

Vinyl Fence
Vinyl fencing gives you a clean, uniform privacy line that won’t rot, splinter, or need repainting, which suits Coral Gables yards where wood struggles with moisture. It’s the right pick when you want a low-maintenance boundary and a consistent look from the street. We build with Bufftech profiles, set posts in concrete with room for expansion, and hang gates with hardware rated for the panel weight so the latch keeps lining up year after year.

Aluminum Fence
Aluminum fencing is the go-to for pool enclosures, front-yard definition, and anywhere you want an open, ornamental look without the rust risk of steel. Homeowners call for it when a wood fence blocks too much of the yard or when a pool barrier needs to be both secure and visually light. We install Ameristar systems with racked panels that follow grade changes instead of stepping awkwardly, and we set posts plumb so the rails read straight from any angle.
Iron Fence
Iron fencing delivers the heaviest, most architectural presence of any residential option, which is why it shows up on Coral Gables properties with a strong street-facing design. It’s typically chosen for estate frontage, driveways, and gates that need to look substantial and last. We set heavy posts in properly sized concrete footings, align pickets and finials precisely, and coordinate the finish so the fence reads as part of the architecture rather than an add-on.
Fence Repair
Fence repair covers the failures that show up fastest here: leaning or rotted posts, storm-loosened panels, sagging gates, broken pickets, and hardware that’s stopped catching. It’s the right call when the fence line is mostly sound but a few sections have failed, since a targeted repair costs far less than a full replacement. We assess whether the footing, the panel, or the gate hardware is the actual problem before recommending anything, and we tell you plainly when repair no longer makes sense.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Fence systems live or die on their components, so we specify by name rather than by category. Master Halco chain link and gate hardware is what we reach for when a run needs to stay tensioned and true through a wet season, and we know exactly where those systems loosen first: terminal posts, tension bands, and gate hinges. Ameristar aluminum is our reference point for ornamental and pool fencing, and we’re fluent in how its racked panels handle grade so the fence doesn’t get forced into awkward steps. Bufftech vinyl is a common request for privacy lines, and we know how those profiles behave in heat and how much room the posts need for movement.
Jerith is another ornamental line we work with regularly, and its picket spacing and gate coordination come up often on front-yard and driveway projects. Because we’re a multi-trade contractor with more than 50 named brand relationships across the trades, we can compare materials side by side on the same estimate rather than pushing whatever happens to be available. Whether you have Master Halco, Ameristar, Jerith, Bufftech, or any other make, we can help.
Signs You Need Fence Installation Right Now
- Posts leaning after heavy rain. A post that shifts after a storm usually means the footing is too shallow or the soil is holding water. Left alone, the lean spreads down the line and takes panels with it.
- Soft or crumbling wood at the base. Push a screwdriver into the bottom of a post or picket; if it sinks easily, the wood is failing from the ground up. That’s the point where repair stops being worth it.
- Gates that drag, stick, or won’t latch. A gate that’s dropped usually signals a failing hinge post or stretched hardware. It’s a security gap and it gets worse fast once the post starts to move.
- Fading, chalking, or cracking vinyl. Vinyl that’s gone chalky or shows hairline cracks is past its useful finish, and panels can fail at the rails. It’s worth pricing a replacement before a section comes down on its own.
- Rust bleeding through an ornamental fence. Rust at the welds and post bases on iron fencing means the coating has broken down. Once it’s structural, patching rarely holds.
Our Fence Installation Process – Step by Step
- 1
Property walk and layout. We walk the fence line with you, confirm the boundary, note gates, slopes, irrigation, and anything buried, and talk through the material options that fit the job. This is where we compare profiles and heights side by side instead of guessing.
- 2
Written line-item estimate. You get a written quote that separates posts, panels, gates, hardware, and any removal or site work. Nothing starts until you’ve seen the numbers and the scope in writing.
- 3
Permits and utility checks where required. Most cities require a permit for a fence over a certain height or for a pool barrier, so we confirm what Coral Gables requires and call for utility locates before any digging. That protects you from cutting into a line and from a fence that has to come back out.
- 4
Removal and site prep. Old fencing comes out, debris goes away, and we set the new line with string and grade so panels follow the ground correctly. Post holes get dug to the depth the soil and load call for, then set in concrete.
- 5
Installation and final walk. Panels, rails, gates, and hardware go in, then we walk the finished fence with you, check every latch and diagonal, and confirm the line reads straight. Any punch items get handled before we call it done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Coral Gables?

Typical fence installation in Coral Gables runs $3,500 – $9,000 for vinyl and $4,000 – $10,000 for aluminum, depending on length, height, gate count, and how much site work the property needs. Wood fencing generally lands in the same range as vinyl, with the exact figure set by the run length and post count. A typical vinyl privacy fence in Coral Gables runs $3,500 – $9,000 depending on linear footage and how many gates you need. A typical aluminum fence runs $4,000 – $10,000, with heavier ornamental runs and multiple gates pushing toward the top. All of these are estimates; the written estimate sets the final price.
What moves the number: total linear feet, fence height, material choice, gate size and hardware, how many old posts have to be pulled, and whether the ground needs grading or the line crosses roots or buried utilities. Corner lots and long frontages add posts and panels faster than most homeowners expect. To avoid overpaying, get a line-item quote rather than a lump sum, confirm whether removal and haul-away are included, and ask what the footing depth will be. Our free estimate includes the layout, the material comparison, and a written scope with no change orders once the price is set.
Fence Installation Near Coral Gables – Our Service Area
We work across Coral Gables and the surrounding neighborhoods, including Glenvar Heights, South Miami, Coral Terrace, and Sunset, plus Pinecrest, Palmetto Bay, Olympia Heights, Kendall, Westchester, Westwood Lakes, and Palmetto Estates. Fence work is planned rather than dispatched, so timing depends on the scope and permit requirements; we confirm the schedule with you when the estimate is approved. If you’re comparing options across town, our fence installation page covers the same process for that area.
Serving Coral Gables, FL – Our Local Coverage Area
We serve Coral Gables and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Coral Gables

Fence installation is the process of setting posts, building panels or rails, hanging gates, and finishing hardware to create a new boundary or enclosure on a property. It includes layout, footing work, material selection, and often permit coordination for height or pool barriers. We handle the whole scope as one of our seven trades, from removal of the old fence to the final walkthrough. Call (844) 797-9523 for a free estimate.
Most residential fence installations take a few days once permits and materials are in hand, with larger runs and multiple gates stretching longer. The bigger variable is permit timing, since Coral Gables reviews fence height and pool barrier plans before work starts. We give you a realistic schedule with the written estimate instead of promising a date we can’t hold. Call (844) 797-9523 to talk through your timeline.
Typical estimates run $3,500 – $9,000 for vinyl and $4,000 – $10,000 for aluminum, with wood landing in a similar range. The final number depends on linear footage, height, gates, and site conditions. All figures are estimates, and the written estimate sets the final price. Call (844) 797-9523 for an exact quote, since estimates are free.
Yes. We install and service Ameristar aluminum systems, including racked panels that follow grade, and Bufftech vinyl profiles for privacy lines. We’re also fluent in Master Halco chain link and Jerith ornamental fencing. If your fence is one of these or any other make, we can help. Call (844) 797-9523 to confirm what’s right for your property.
Same-day service is available for some fence repairs when the scope is clear, though full installations are planned around permits and material lead times. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, with Saturday closed. A call outside dispatch hours is booked into the next opening. Call (844) 797-9523 to get on the schedule.
Yes, our installation workmanship is backed by a warranty, and material warranties come from the manufacturer of the fence system you choose. We cover both in the written estimate so you know exactly what’s protected and for how long. If something goes wrong with the install, we come back and make it right. Call (844) 797-9523 with questions about coverage.
Clear the fence line of furniture, planters, and anything you want to keep, and make sure we can reach the property line on both sides where possible. Note any irrigation lines, lighting, or buried cables in the path, and confirm the boundary with your survey if you have one. Tell us about pets and gate access ahead of time so we can plan around them. Call (844) 797-9523 to schedule your free estimate and walk the layout with us.
Schedule Your Fence Installation Service in Coral Gables Today
Call (844) 797-9523 to schedule your free fence installation estimate in Coral Gables. We’ll walk the line, compare materials by name, and hand you a written line-item quote with no obligation. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One contractor, every trade, from the driveway to the roofline. Learn more about Coral Gables Construction and how we handle projects across fence installation and beyond. Neighbors in fence installation areas can book the same walkthrough. Pair the fence with our driveway and pavers work for a finished front yard.
Written by the team at Coral Gables Construction.












