







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose CWS Construction
Coral Gables Construction provides independent CWS cabinetry and millwork service in Coral Gables, FL: we install, specify, reface and troubleshoot CWS semi-custom and stock cabinet lines, and we fix the door, hinge, glide and box problems CWS kitchens develop over time. What makes our CWS work different is that we handle the whole room around the cabinets, not just the boxes: installation or refacing, quartz and granite countertops, backsplash, islands and full kitchen remodeling are all ours to coordinate. We are an independent service provider. We are not affiliated with, authorized by, or a dealer for CWS, and we don’t claim to be. Bring us a CWS kitchen that rubs, drifts, peels or swells, and we’ll diagnose it honestly and quote the fix in writing. Call (844) 797-9523.
Why Trust Coral Gables Construction for Your CWS Construction?

Our technicians have up to 12 years of experience with CWS cabinets and the brands that live around them, and that experience is specific. We know how CWS semi-custom all-plywood base and wall cabinets are built, how the stock shaker and raised-panel door styles behave after a few humid seasons, where painted and thermofoil finishes fail first, and how the CWS vanity and bath cabinet programs differ from kitchen boxes. That matters because CWS work rewards familiarity. A hinge that’s out of adjustment, a glide that’s worn, a toe kick that’s swelled, a frame that’s racked a quarter inch out of square on an uneven floor: each of those has a right fix and several wrong ones, and the wrong ones usually show up six months later as a door that rubs again.
We use quality parts that fit CWS cabinetry, we keep the repair warranty-safe by working with the way the box and door were engineered, and we put the scope in writing before anything comes off the wall. Insured and bonded, free estimates, written line-item quotes. For CWS cabinet and millwork work in Coral Gables, that’s the standard we hold ourselves to.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Coral Gables
CWS cabinets are well made, and the failures we see in Coral Gables kitchens are predictable ones. Most start small and get expensive if they’re ignored.
- Soft-close hinges and drawer glides that wear or lose adjustment. Soft-close mechanisms are the first thing to go on a working kitchen. The dampers weaken, the hinge plates drift, and suddenly doors rub against the frame and drawers won’t stay closed. Left alone, a rubbing door wears through its finish at the edge where moisture gets in. We reset, shim and replace worn hardware with matching CWS-spec parts so the door lines up and closes the way it did when the kitchen was new.
- Thermofoil and painted finishes peeling, blistering or yellowing at edges. Thermofoil is a laminate bonded to the door core, and heat and humidity attack the bond at the edges and around the sink where moisture sits. Painted doors do the same at the joints, and both yellow unevenly in strong daylight. This is a Coral Gables humidity story more than a manufacturing one, and it’s why we look closely at door edges before quoting a repair. Sometimes a small area can be re-bonded and touched up; once the peel is running, refacing or new doors is the honest answer.
- Swollen box panels at the toe kick and sink base. Particleboard and MDF panels swell and crumble when they stay wet, and the sink base is the usual victim of a slow drip or an old slab leak nobody caught. The toe kick swells too, from mopping and from moisture rising off a tile floor. We check these areas on every CWS service call, because a swollen sink base that looks cosmetic can be failing structurally underneath.
- Racked frames on uneven tile floors. Coral Gables homes sit on tile and old slab, and the floors are rarely flat. When a cabinet run goes out of square, the doors and drawer fronts stop aligning even though the hardware is fine. We shim and reset boxes so the frames come back square and the reveals line up.
- Worn drawer boxes and loose hardware at the corners. Drawer boxes take a beating in a busy kitchen, and joints loosen over time. Hardware pulls work free of the door face. We tighten, repair and replace what’s worn, and check the rest of the run while we’re there.
Here’s how a typical CWS kitchen call usually goes. Doors that rub and drawers that drift open lead to tired soft-close hinges and glides, or to a run that’s gone out of square over an uneven floor. A qualified local pro resets and shims the boxes, replaces worn hardware with matching CWS-spec parts, and checks under the sink base for swelling from a slow leak. When thermofoil or painted edges have already peeled, that same visit turns into a conversation about refacing versus new boxes, often paired with a countertop swap.
CWS Parts & Our Repair-vs-Replace Approach

Parts choice is where a lot of CWS cabinet repairs quietly go wrong. We use CWS-specified or equivalent OEM hinges, glides and touch-up finishes so the cabinetry keeps functioning and matching, and we’ll recommend quality aftermarket hardware when it genuinely outperforms the original at a lower cost, with the trade-off spelled out. We don’t stock or sell CWS parts and we’re not a CWS dealer, so we source what fits the box and the door rather than what’s on a shelf.
Repair is often the right call. If the boxes are solid and the doors are structurally sound, new hinges, glides, shims and a touch-up will put the kitchen back to working order for far less than replacement. Replacement makes more sense once thermofoil has peeled across the face, or once a box has swollen and lost its structure, because at that point you’re paying to keep patching something that won’t hold.
Call (844) 797-9523 for a free estimate. We answer 24/7, and we’ll tell you which side of that line your CWS kitchen falls on.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We look at the whole CWS run, not just the door that’s rubbing. Hinges, glides, box joints, toe kick, sink base, floor level and door alignment all get checked, because the symptom and the cause are usually in different places.
- 2
Repair or install. For repairs, we reset and shim the boxes, replace worn hardware with matching parts and address finish damage. For installs, we set CWS base and wall cabinets level and square, hang doors with consistent reveals, and fit the toe kick to the floor. Cabinet Installation runs $4,000 – ol3,000.
- 3
Test. Every door and drawer gets opened and closed through its full travel. We check soft-close operation, drawer drift, reveal gaps and the sink base for moisture before we call it done.
- 4
Warranty. If a peel, a rub or a hardware install fails after we’ve worked on it, we come back and make it right. That’s what keeping the work warranty-safe means to us.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Coral Gables
We work on the full range of CWS kitchen and bath cabinetry: semi-custom all-plywood base and wall cabinets, the stock shaker and raised-panel door styles, painted and thermofoil finish cabinet lines, and the CWS vanity and bath cabinet programs. That covers new installation, refacing, hardware replacement, door and drawer front repair, box resets, and full kitchen remodeling where the cabinets are one piece of a larger job. We don’t limit ourselves to what’s easiest to source. If it’s a CWS box, door, drawer, hinge or glide, we can specify, install or troubleshoot it.
We Also Service These Brands
CWS is one roster line, not the whole kitchen. We specify and install KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures with Grohe and Schluter components, alongside the roofing, window, paver and ADU brands we handle. That range means we can match a CWS kitchen to the right cabinets, counters and fixtures for the room, rather than force-fitting whatever a single brand offers. Multi-brand depth, one accountable contractor.
FAQs – CWS Construction Service in Coral Gables

No. We are an independent CWS service provider, not a dealer, and CWS has not authorized, certified or factory-trained us. Our credibility comes from handling CWS installs and repairs across Coral Gables kitchens and baths, not from a manufacturer relationship. Call (844) 797-9523 for a free estimate.
Yes. We use CWS-specified or equivalent OEM hinges, glides and touch-up finishes so the cabinetry keeps functioning and matching, and we’ll use quality aftermarket hardware where it clearly outperforms the original at a lower cost. We don’t stock or sell CWS parts, but we source what fits.
Usually, yes, though it depends on the door style and finish. We match profile, finish and hardware against the existing run so a partial replacement doesn’t read as a patch job. When an exact finish match isn’t available, refacing the whole run is often the cleaner route, and we’ll quote both so you can compare.
Thermofoil and painted finishes peel at the edges because heat and Coral Gables humidity weaken the bond where the laminate meets the door core, and moisture collects around the sink. Once peeling starts on a door edge, it tends to spread. We assess whether the door can be re-bonded and touched up or needs replacing, and we check the rest of the run for the same failure. Call (844) 797-9523 for a free estimate.
Sometimes, and it depends on how far the swelling has reached. If the sink base panel has swelled and crumbled, that section needs replacing, but the surrounding boxes are often sound and can be kept. Repair is usually the right call when the boxes and doors are structurally intact; replacement makes more sense once thermofoil has peeled wide or the swollen boxes have lost their structure. We’ll tell you which one your kitchen needs.
Yes, provided the cabinet run is level and square, which we check first. A new stone top on a racked run will crack or show uneven seams, so we reset and shim the boxes before templating. Countertop installation runs $2,000 – $6,500, and a kitchen island adds $3,000 – $10,000. Call (844) 797-9523 for a free estimate.
No. Refacing keeps the existing boxes and replaces the doors, drawer fronts and visible surfaces, which is faster and less disruptive than a tear-out. It works best when the boxes are solid and the failure is at the door and finish level, which is where most CWS peeling starts. If the sink base or toe kick has swollen, that section comes out and gets replaced during the reface.
Typical estimated ranges for CWS cabinet and kitchen work in Coral Gables:
| Service | Typical estimated range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
These are estimates. The written estimate sets the final price, and it’s free. Call (844) 797-9523 to schedule yours.
Hardware, alignment and hinge repairs are usually a day’s work; refacing runs longer; a full kitchen remodel with new boxes and a stone top takes considerably longer and depends on lead times. We give you a realistic schedule in writing with the estimate. Call (844) 797-9523 for a free estimate.
Proper service should not void your CWS warranty, and we work carefully to keep it warranty-safe by using parts that fit and following how the cabinet was engineered. Warranty terms are set by CWS, so it’s worth keeping your original documentation. We can work with your situation and explain exactly what we’re doing and why.
Book Your CWS Service in Coral Gables, FL
Whether your CWS kitchen needs new hinges and a reset or you’re weighing refacing against a full remodel with quartz counters, we’ll give you a written estimate and an honest read on which path makes sense. One contractor, every trade. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Free estimates.
Written by the team at Coral Gables Construction.












