







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose ECO Window Systems Construction
We provide independent ECO Window Systems construction, repair and service in Coral Gables, and we do it as an independent shop, not a dealer or an authorized agent of the manufacturer. What sets our ECO Window Systems work apart is that we treat the whole opening, not just the part that failed: the glass unit, the rollers and hardware, the perimeter seal, and the anchoring behind the frame all get checked before we recommend anything. Coral Gables Construction is a multi-trade residential contractor working from the driveway to the roofline, and windows and doors are one of the seven trades we handle. Our technicians have up to 12 years of experience with impact-rated aluminum and vinyl assemblies like the ones ECO Window Systems builds. Call (844) 797-9523 to schedule a free estimate.
Coral Gables is a different job site than Miami or South Miami, and anyone who works here regularly knows it. The city is fully built out and master-planned in the Mediterranean Revival style, and the Board of Architects reviews exterior work before a permit moves. Change the look of a window opening, swap a sash profile, alter the trim, and you’re in design review. That single fact shapes every ECO Window Systems project in Coral Gables more than the product itself does. We plan the paperwork and the product selection together.
Why Trust Coral Gables Construction for Your ECO Window Systems Construction?

ECO Window Systems builds impact-rated aluminum and vinyl assemblies: single-hung and horizontal roller windows, sliding glass doors, vinyl impact windows, and fixed picture units. We know these products in the field, not from a brochure. Our technicians have worked across Miami-Dade and Broward on impact glazing and understand which ECO configurations are repair-friendly and which aren’t. A single-hung sash that’s still square and true can often take a new glass unit and hardware; a frame that has distorted under repeated heat cycling usually can’t.
We’re clear about what we are: an independent ECO Window Systems service provider. We are not affiliated with, authorized by, or certified by ECO Window Systems. We don’t stock, carry or order OEM or genuine ECO Window Systems parts, and we don’t hold ourselves out as a dealer. What we do is install, repair and service ECO Window Systems equipment with quality parts that fit it, sourced from multiple supply chains rather than one manufacturer’s parts pipeline.
Warranty-safe practice matters as much as the part. We document what we open, photograph the assembly before and after, and avoid the shortcuts that give a manufacturer a reason to deny a claim. When a part is supplied under warranty, we’ll tell you plainly so you can pursue it with the manufacturer. When it isn’t, we quote the repair in writing with fixed pricing and no change orders.
Bring us an ECO Window Systems opening that’s fogged, binding, leaking or locking badly, and we’ll tell you what’s actually wrong before we quote a fix.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ECO Window Systems Construction Problems We Fix in Coral Gables
The failures we see on ECO Window Systems products in Coral Gables tend to follow the climate rather than the calendar. These are the five that come up most.
- Failed perimeter sealant and gasket compression at the frame-to-wall junction. After several hurricane seasons of UV cycling, the sealant at the wall interface hardens, shrinks and pulls away, and the gasket behind it loses its compression set. The frame looks fine. Then a wind-driven rain event pushes water past the joint and it shows up inside the wall or on the interior sill. This is Coral Gables’ most common impact-window leak pattern, and re-sealing the perimeter properly is a real job, not a caulk bead.
- Roller and track wear on ECO sliding glass doors. The rollers flatten and the track accumulates grit, so the panel binds, rides out of square, and stops sealing at the meeting stile. Water then pools in the bottom track during heavy summer rain because the weep path is blocked or the panel no longer sits where it should. Replacing rollers and re-setting the panel usually restores the glide and the drainage.
- IGU seal failure in ECO impact glass units. Fogging or a milky haze between the panes means the insulated glass unit’s edge seal has failed and moisture has entered the cavity. It happens most on south- and west-facing elevations, where afternoon sun drives the thermal cycling hardest. The glass has to be replaced; there’s no repair that restores a failed IGU.
- Latch, lock and multi-point hardware corrosion or misalignment. Hardware that no longer engages fully is more than a nuisance. On an impact opening, the lock and multi-point hardware hold the sash against design pressure. Corroded or misaligned hardware compromises that performance, and it’s one of the things an inspector will flag.
- Non-conforming anchoring uncovered during renovation. In Coral Gables’ 1920s-to-1970s housing stock, a replacement window may have been set into an opening whose anchoring doesn’t meet current wind-load and uplift requirements. When we open a wall for a renovation or addition, we check. Correcting it is part of getting the opening to code.
ECO Window Systems Parts & Our Repair-vs-Replace Approach

We use ECO-compatible OEM-spec glass units, rollers, locks and weatherseals when they’re available, and when they aren’t we source equivalent-rated impact components that meet Florida Product Approval and Miami-Dade NOA requirements. We don’t claim to stock any of it. What we bring is the judgment about what fits and what performs.
The repair-or-replace call comes down to the frame. If the frame and the opening are sound and square, and the failure is glass, hardware or sealant, we repair the individual sash or unit. That’s usually the smarter spend. If the frame has distorted, if the same seal has failed repeatedly at the same joint, or if the anchoring is non-compliant and can’t be corrected in place, patching becomes uneconomical and we’ll say so. We’d rather tell you to replace one opening than sell you a repair that fails again next hurricane season.
Call (844) 797-9523 and we’ll walk the openings with you before any number gets written.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis. We inspect the full assembly: glass unit, sash or panel, rollers and track, lock and multi-point hardware, perimeter sealant and gasket, and the anchoring at the frame. On a Coral Gables home we also look at the roof-to-wall junction above the opening, because a leak that reads as window intrusion is sometimes roof flashing.
- 2
Repair or install. Glass units come out and go back with the correct setting blocks and glazing tape. Rollers, locks and weatherseals get replaced with rated components. New installations are set plumb and square to the opening, anchored to current wind-load requirements, and flashed and sealed at the perimeter.
- 3
Test. We operate every sash, panel and lock, check the weep paths and drainage, and water-test the perimeter where the scope allows. The opening has to close, latch and shed water the way it was engineered to.
- 4
Warranty and documentation. You get the written record of what was opened and what was replaced, which is what you’ll need if a manufacturer claim comes up later. Our workmanship is warranted, and the paperwork is yours to keep.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Products We Service & Install in Coral Gables
We service and install the ECO Window Systems product types that show up on Coral Gables homes: aluminum single-hung and horizontal roller impact windows, sliding glass doors, vinyl impact windows, and fixed or picture impact units. That covers the common calls, from a fogged unit that needs new glass to a door that won’t glide to a full opening replacement as part of a larger renovation. We also handle impact window installation, window replacement and the roof repair work that so often runs alongside it on older Coral Gables houses. If you’re not sure what you have, we can identify it on site.
We Also Service These Brands
ECO Window Systems is one option among several we work with. We also service and install product from PGT and CGI, and our broader remodeling work specifies kitchen and bath brands like KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. The point is choice: you get an apples-to-apples comparison across manufacturers, not a single take-it-or-leave-it option. That’s how we work across all seven of our trades in Coral Gables.
FAQs – ECO Window Systems Construction Service in Coral Gables

No. We are an independent ECO Window Systems service provider and are not affiliated with, authorized by, or certified by the manufacturer. We install, repair and service ECO Window Systems products with quality parts that fit them, sourced independently.
Yes. We use OEM-spec glass units, rollers, locks and weatherseals when they’re available, and equivalent-rated impact components meeting Florida Product Approval and Miami-Dade NOA requirements when they aren’t. We don’t stock parts, but we source what fits and performs. Call (844) 797-9523 for a free estimate on your opening.
Most single-opening repairs, like a glass unit swap or a roller and hardware replacement, are completed in a day. Full window replacement or impact window installation across several openings runs longer and depends on product lead times and Coral Gables permitting. We’ll give you a realistic timeline with the written estimate.
We cover aluminum single-hung and horizontal roller impact windows, sliding glass doors, vinyl impact windows, and fixed or picture impact units. That includes glass, hardware, rollers, sealant and anchoring work on all of them.
Not if it’s done correctly. We work warranty-safe: we document what’s opened, avoid methods that give a manufacturer grounds to deny a claim, and tell you when a part is supplied under warranty so you can pursue it directly. When a part isn’t covered, we quote the repair in writing.
Typical estimated ranges in Coral Gables are below. These are estimates, and the written line-item estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $8000 – $25000 |
| Window Replacement | $4500 – $15000 |
| Roof Repair | $400 – $1800 |
Cost depends on the number of openings, glass size, hardware, and whether the anchoring or perimeter needs correcting. Call (844) 797-9523 for an exact quote. Estimates are free.
Book Your ECO Window Systems Service in Coral Gables, FL
If you have a fogged ECO impact unit, a sliding door that sticks and pools water, or hardware that no longer latches tight, we’ll diagnose it and quote the repair in writing with fixed pricing. Coral Gables Construction handles the window work and the roof repair it’s often tied to in one scope. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Coral Gables Construction.












