







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose Jerith Construction
Coral Gables Construction provides independent Jerith fence and railing service across Coral Gables, FL: installations, repairs, and the hard assessments that come from working with the product regularly rather than from a manufacturer’s brochure. We are an independent service provider, not affiliated with or authorized by Jerith, so our recommendations stay honest about what the product can and cannot do in South Florida conditions. What sets our Jerith work apart is the same thing that drives every job we take: one contractor who knows the trade from the driveway to the roofline. Call (844) 797-9523 for a free estimate.
Jerith is a US-made line of aluminum and vinyl fence and railing systems, and anybody who has installed a few runs knows that the difference between a clean result and a call-back lives in the details – the right brackets, the right post caps, and section assembly done in the correct order. Those details matter even more in Coral Gables, where a fully built-out master-planned Mediterranean Revival city and one of the strictest design-review regimes in the country combine with sandy soil and heavy summer rain to test every fence line you put in the ground.
Why Trust Coral Gables Construction for Your Jerith Construction?

Our technicians have up to 12 years of experience with residential fencing and railing, and they know Jerith systems on the level that matters: how the sections behave over heat cycles, where the brackets tend to loosen first, and what a proper post footing looks like in Coral Gables ground. We install and service Jerith with quality parts that fit it – genuine Jerith replacement sections, posts and caps where profile and color matching matter, and quality aftermarket hardware for wear items like hinges and latches. That mix keeps the system looking consistent and working the way it should.
The service approach is conservative on purpose. If the gate is sagging because a hinge has worn, we swap the hinge. If a vinyl run is racking because the footings were too shallow, we reset the posts rather than selling a whole new fence. The choice to repair versus replace is explained clearly, in plain terms, with a written line-item estimate before anything gets dug or cut. All of this happens inside Coral Gables’ own approval environment: exterior work here goes through the Board of Architects and the City Beautiful-era design expectations that come with it, and the platinum-level tree canopy rules can affect where posts can go. Fast dispatch, 7am-7pm, Sunday through Friday. We answer 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Fix in Coral Gables
- Vinyl post and rail sections sagging or separating. After years of UV exposure and heat cycling, the bottom rail can pull free of the post and leave a gap that only widens. The symptom shows up as a soft, wobbly section, but the usual cause is a footing issue and expansion stress working together. It’s a fixable problem, and rarely a reason to tear out the run.
- Aluminum ornamental panels with powder-coat chalking, fading or flaking. South- and west-facing runs take the worst of the sun, and the coating can dull and eventually flake. It’s cosmetic at first and functional later – once the finish goes, the metal underneath is exposed and looks worse every season.
- Racked or leaning fence lines. In Coral Gables’ sandy, high-water-table soil, a shallow post footing lets the whole line drift out of plumb rather than any single panel failing. It’s why a fence that looks perfect at year two can look tired at year six, and why footing depth is worth arguing about during installation.
- Loose, corroding gate hardware and hinges. The gate is the moving part, and it takes the beating. Hinges loosen, latches stop lining up, and the gate starts dragging. That’s the wear item on any Jerith system, and it’s the cheapest category to fix before it cracks a post.
- Sections damaged by storm or impact. A fallen branch or a wind event can bend or crack a panel. On an isolated hit, a Jerith replacement section usually restores the run without a full re-do – once the post underneath has been checked.
A common version of this: a homeowner notices a Jerith vinyl privacy run leaning after a rainy season, with a bottom rail pulling free of a post. The usual cause is a shallow footing in sandy soil combined with heat-driven expansion, not a failed panel. A qualified installer resets or deepens the posts, re-plumbs the line and re-secures the sections with the correct brackets and caps rather than simply replacing slats. That’s the general pattern for this kind of job in Coral Gables – not a specific customer’s story, just how the work usually goes.
Jerith Parts & Our Repair-vs-Replace Approach

We don’t stock OEM or genuine Jerith parts, and we’re not a Jerith dealer. What we do is select quality parts that fit Jerith equipment: genuine Jerith replacement sections, posts and caps when color and profile matching needs to hold, and quality aftermarket brackets and hardware for wear items where matching doesn’t matter. Nobody at Coral Gables Construction claims to be factory-trained or certified by the manufacturer. We’re an independent trade resource, and the assessment reflects that.
The repair-versus-replace call usually comes down to how much of the run is affected. Isolated storm or impact damage almost always argues for repair. When UV degradation, racking or code-driven pool-barrier requirements have compromised multiple runs at once, replacement starts to make more sense than patching a fence that will keep failing. Pool-code railing systems need special attention in Coral Gables: the barrier requirement is about the whole structure, not just the top rail, so a repair has to leave the barrier intact.
Call (844) 797-9523 and we’ll walk the run with you and put the recommendation in writing.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We look at the fence as a system – panel condition, post plumb, footing depth, finish condition on the sun-facing side, gate hardware, and – on pool railing – the barrier requirement. If a tree or the design-review rules affect the layout, we raise that early rather than after digging.
- 2
Repair or install plan in writing. Every path is priced line by line, with the parts named and the reason for each one. That includes whether we’re using genuine Jerith sections or quality aftermarket hardware, and what that does to the look and the lifespan.
- 3
Execution. Posts get set plumb at a footing depth that suits Coral Gables’ sandy soil. Brackets and caps go on in the correct order so the sections seat cleanly. Gate hardware is set to line up with the latch on day one, not to get adjusted later.
- 4
Test and walk-through. Every gate gets swung, every latch checked, every post tapped for movement. On aluminum ornamental runs, we point out the finish condition so you know what to expect over the next few years.
- 5
Workmanship warranty. The workmanship warranty is written into the estimate, not added on later. If something shifts or sags within the term, we come back and correct it.
Jerith Products We Service & Install in Coral Gables

We service and install the Jerith fence and railing lines that matter for Coral Gables homes, including the Regency vinyl privacy fence, the Patriot aluminum ornamental fence, the Builder’s Choice vinyl picket fence, and Jerith aluminum pool-code railing systems. For homeowners in the 1920s Mediterranean Revival and Mission-style houses whose yards sit on small historic-district lots, the picket and privacy lines often make more sense than ornamental aluminum because they read more quietly against the original streetscape. Aluminum ornamental runs make sense where a lighter look fits the property. Pool-code railing is its own animal – it has to actually meet the barrier requirement, not just look right.
Aluminum Fence Installation in Coral Gables
Jerith aluminum ornamental and pool-code railing systems installed with the footing and finish work that South Florida conditions demand. Aluminum fence installation in Coral Gables typically runs $4,000-$10,000.
Vinyl Fence Installation in Coral Gables
Jerith Regency vinyl privacy and Builder’s Choice vinyl picket systems installed to seat correctly and stay plumb through heat cycles. Vinyl fence installation in Coral Gables typically runs $3,500-$9,000.
Impact Window Installation in Coral Gables
For homes that need glazing addressed alongside fence work, we install impact windows through our broader window and door capability, with impact-rated and specialty lines on the roster. Impact window installation in Coral Gables typically runs $8,000-$25,000.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Coral Gables
Typical estimated ranges for the Jerith work we do most in Coral Gables. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
| Impact Window Installation | $8,000-$25,000 |
We Also Service These Brands
Brand depth is one of the reasons Coral Gables homeowners bring us into a project. We work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on the interior trades, and with multiple manufacturers across roofing, windows, doors and pavers. That means we can compare Jerith against the alternatives honestly, rather than steering a homeowner toward a system because it’s the only one we know. Specify by name, not by category, and the right material for the project usually reveals itself.
FAQs – Jerith Construction Service in Coral Gables
No. Coral Gables Construction is an independent Jerith service provider. We are not affiliated with or authorized by Jerith, we’re not a Jerith dealer, and we’re not factory-trained or certified by the manufacturer. We’re a multi-trade contractor who repairs, installs and services Jerith fence and railing systems with quality parts that fit them.
Yes. We use genuine Jerith replacement sections, posts and caps where profile and color matching need to hold, and quality aftermarket brackets and hardware for wear items like hinges and latches. We don’t claim to stock OEM or genuine parts, and we’ll say plainly in the estimate which parts we’re recommending and why.
Most Jerith fence repairs are completed in a single visit – gate hardware, an isolated section, a post reset. Full-run installations take longer depending on linear footage, gate count, and whether the Coral Gables design-review or tree-canopy rules affect the layout. We’ll give you a realistic timeline with the estimate. Call (844) 797-9523 and we’ll book it.
We service and install the Jerith Regency vinyl privacy fence, the Patriot aluminum ornamental fence, the Builder’s Choice vinyl picket fence, and Jerith aluminum pool-code railing systems. If you have a Jerith system on your Coral Gables property that isn’t on that list, call us and we’ll tell you straight whether it’s something we handle.
It can, if the installed system actually meets the barrier standard as a whole – top rail, gap spacing, gate self-closing hardware and post spacing all have to be right, not just the visible fence line. Jerith aluminum pool-code railing systems are designed for this use, but the installation has to match. Coral Gables’ own building department reviews pool enclosures, so it’s worth confirming the requirement before the fence goes in.
The usual cause is a shallow post footing in Coral Gables’ sandy, high-water-table soil, working together with heat-driven expansion of the vinyl itself. It’s rarely a product defect. Resetting or deepening the posts, re-plumbing the line and re-securing the sections with the correct brackets and caps usually restores the run. That’s also why footing depth is worth getting right on the first install.
It can. Powder-coat chalking, fading or flaking is most common on south- and west-facing runs where the coating takes the worst of the sun and moisture. A spray-down routine helps, and inspecting the finish before it fully fails is cheaper than waiting. On Coral Gables properties the humidity side of that equation rarely lets up, so it’s worth checking the sun-facing panels each year.
Repair usually wins when the damage is isolated to one or two sections – a Jerith replacement section restores the run and keeps the profile matching intact. Replacement starts to make more sense when UV degradation, racking or pool-code failures have compromised multiple runs at once. Call (844) 797-9523 and we’ll give you a straight answer on which one fits your situation – the estimate is free.
Not safely. Coral Gables’ small historic-district lots and the City Beautiful-era plats sometimes put fence lines very close to the neighbor’s property, and a fence installed over the line can become an expensive removal. We confirm property lines and any tree-canopy or design-review overlay before posts go in the ground. The written estimate covers the layout we’ve confirmed.
Typical estimated ranges: vinyl fence installation runs $3,500-$9,000, aluminum fence installation runs $4,000-$10,000, and impact window installation runs $8,000-$25,000. Repairs on isolated damage are usually a fraction of that. The written estimate sets the final price, and it’s free. Call (844) 797-9523 for an exact quote.
Book Your Jerith Service in Coral Gables, FL
If you’re dealing with a leaning Jerith run, a gate that’s stopped lining up, or you’re planning a fresh installation in Coral Gables, we’re ready to look at it. One contractor, every trade – and an honest read on what your Jerith system needs. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Coral Gables Construction.












