







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose Belgard Construction
Coral Gables Construction provides independent Belgard construction service in Coral Gables: installation, repair and replacement of Belgard paver driveways, patios, walkways and retaining wall systems. We work on Belgard hardscape every week, so we know how Mega-Arbel, Catalina, Urbana and Weston Wall blocks behave once South Florida’s wet season gets into a base that was built too thin. Our technicians have up to 12 years of experience.
We are an independent installer and repair resource. We are not a Belgard dealer, not an authorized contractor, and we have no affiliation with or authorization from Belgard. What that means for you is simple: we scope the job on what your pavers are actually doing, not on what a sales program wants moved.
Driveway and patio work in Coral Gables runs through a building department that reads plans closely, and we treat that as normal. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We install and repair Belgard pavers, slabs and wall block as an independent contractor, never as a Belgard dealer.
- Most Belgard failures we see in Coral Gables trace back to base and drainage, not to the paver surface.
- We match your existing Belgard profile, thickness and color series so a repair blends into the field.
- We use manufacturer-spec polymeric sand and edge restraint, not generic substitutes.
- Free estimates, written line-item quotes, and permits pulled where the work requires them.
Why Trust Coral Gables Construction for Your Belgard Construction?

Belgard makes a lot of profiles, and each one asks something different of the base under it. Large-format pavers like Mega-Arbel and Mega-Lafitt carry more surface area per unit, which means fewer joints to lock the field together and a heavier demand on bedding and edge restraint. Slab profiles like Urbana and Catalina behave differently again. Wall systems such as Belair and Weston Wall depend on geogrid and gravel drainage behind the face, not on the block alone.
Our technicians work with those differences directly. When we replace a unit, we match the actual paver profile, thickness and color series rather than dropping in whatever square-edged paver is on hand, because a mismatched unit reads as a patch from the street. Joints get real polymeric sand, not sandbox sand that washes out at the first heavy rain. Where the cause is a base or drainage failure, we say so instead of selling a tear-out.
Warranty-safe practice matters here too. Manufactured paver warranties generally assume correct base preparation, proper compaction and the specified joint sand, and a shortcut on any of those can put a claim in question. We build to those conditions because it protects the investment, not because someone is checking. If your pavers were installed by another contractor, we’ll still look, diagnose and quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Coral Gables
Coral Gables sits in a subtropical climate with a May to November hurricane season and heavy summer rain. Water is the main actor in almost every paver problem we see on Belgard installations here. These are the five we get called about most.
- Efflorescence and salt bloom on Mega-Arbel and Catalina pavers. A white, chalky film appears after the wet season and often comes back. Owners assume the paver is defective. Usually it isn’t. Moisture is moving up through the slab or the bedding and leaving mineral salts on the face as it evaporates, and that points to base drainage holding water under the field. Fix the drainage and the bloom stops returning.
- Polymeric joint sand washing out of wide joints on large-format slabs. Mega-Arbel and Mega-Lafitt have wider joints than a small-format paver, and those joints take more water volume. When the sand is under-filled or applied to a wet joint, it fails, weeds and ants move in, and pavers start to migrate. Re-sanding with manufacturer-spec polymeric sand, installed dry and properly compacted into the joint, is the correction.
- Settling and lippage along the driveway apron and pool deck edges. This is where compaction is thinnest and where edge restraint is most often missing or broken. The apron takes vehicle load and the pool deck edge takes runoff. Once restraint gives, the field spreads, joints open, and a trip edge appears. It’s a base and restraint repair, not a paver replacement.
- Retaining wall block face spalling and joint separation on Weston Wall and Belair systems. Block faces spall when water sits behind the wall with nowhere to go, and joints separate when there’s no geogrid tying the courses back into the soil. Both are installation-layer failures. The block itself is rarely the problem.
- Color and texture mismatch after a partial repair. A repair done with the wrong color series or thickness stands out, especially once the field has weathered. We match the existing Belgard line so the repaired section ages with the rest of the driveway or patio.
Belgard Parts & Our Repair-vs-Replace Approach

We don’t stock or carry genuine Belgard parts, and we’re not a dealer. What we do is source pavers, wall block, polymeric sand and edge restraint that fit your existing Belgard installation correctly, matched to the profile, thickness and color series you already have. That’s the difference between a repair that disappears and one that looks like a scar.
The repair-versus-replace call comes down to where the failure lives. If the pavers themselves are sound and the problem is base settling, thin compaction, missing restraint or blocked drainage, repairing the sub-layer costs less and lasts longer than tearing out surface units. If the units are cracked through, spalled across the face, or the color series is discontinued, replacement of the affected area is the honest answer. We test, we look at the base, and we tell you which one you’re dealing with before any work starts, in a written line-item quote.
Call (844) 797-9523 for a free estimate on your Belgard driveway, patio or wall.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We look at the field, the joints, the edge restraint and the base, and we check where water is going. On a Belgard driveway that means reading the apron, the slope and the low corner. On a wall it means checking drainage behind the face and whether geogrid is present.
- 2
Scope and quote. You get a written line-item estimate covering the surface repair, any base or drainage correction, and the polymeric sand and restraint needed. The written estimate sets the final price, with no change orders unless you approve them.
- 3
Repair or install. Affected courses come up, the base is re-graded and recompacted with proper drainage slope, pavers reset on fresh bedding, joints re-sanded with manufacturer-spec polymeric sand, and edge restraint reinstated. New installations run the same sequence in full.
- 4
Check and hand-off. We walk the finished surface with you, confirm the joints are filled and the edges are locked, and leave you with what the workmanship warranty covers and what routine care the installation needs.
A typical Belgard driveway repair follows a familiar pattern. A homeowner notices loose, rocking pavers and sand washing out at the low corner of a Mega-Arbel driveway after heavy summer rain. The usual culprit is a shallow or poorly compacted base plus missing or failed edge restraint, not the paver surface. A qualified local pro typically pulls the affected course, re-grades and recompacts the base with proper drainage slope, resets the pavers on fresh bedding sand and re-sands the joints with polymeric sand before reinstating edge restraint.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Coral Gables

We work across the Belgard hardscape range that shows up on Coral Gables properties:
- Paver driveways. Installation, replacement and repair, including large-format profile driveways where base and edge restraint do most of the work.
- Paver patios and pool decks. New installations and repairs, with attention to drainage fall and edge conditions.
- Walkways and slab paving. Urbana and Catalina style slab work for paths, entries and courtyard areas.
- Retaining wall systems. Weston Wall and Belair installations, plus repair of walls showing face spalling or joint separation.
- Re-sanding, sealing and edge restraint. Joint sand renewal, surface sealing and restraint replacement on existing installations.
Typical Estimated Ranges for Belgard Work in Coral Gables
These are typical estimated ranges for the Coral Gables market. The written estimate sets the final price once we’ve seen your site, base conditions and access.
| Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Belgard paver work in Coral Gables also runs into the city’s design-review process. The Board of Architects reviews exterior work, and in the historic districts and the Villages that review shapes what materials, colors and profiles are acceptable on a visible surface. We factor that into the plan before the first paver comes up, so a driveway or patio design doesn’t stall after it’s been built. Trees matter here too. The city’s canopy rules can constrain where a driveway apron can be widened or a patio edge extended, so we check that early rather than mid-job.
We Also Service These Brands
Belgard is one of several product families we work with, and that breadth is deliberate. Clients comparing materials can look at Belgard against Unilock and Tremron for pavers. Inside the house we specify KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. One contractor, every trade, from the driveway to the roofline, means you’re not coordinating a paver sub, a cabinet installer and a plumber on separate schedules.
FAQs – Belgard Construction Service in Coral Gables
Is Coral Gables Construction authorized by Belgard?
No. We are an independent Belgard service provider with no affiliation with or authorization from Belgard. We install, repair and service Belgard hardscape systems because we work with them regularly, not because we’re a dealer or authorized contractor.
Do you use quality parts that fit Belgard equipment?
Yes. We match pavers to your existing Belgard profile, thickness and color series, and we use manufacturer-spec polymeric sand and edge restraint rather than generic substitutes. We don’t stock or carry genuine Belgard parts, and we’re not a dealer; we source what fits your installation correctly. Call (844) 797-9523 for a free estimate.
How long does Belgard service take?
Most driveway and patio repairs finish in a day or two once the scope is set. A base correction or a full paver driveway installation runs longer, and the written estimate gives you the schedule for your specific site. Coral Gables design review, where it applies, can add time to the front end of a project.
What kinds of Belgard products do you cover?
Paver driveways, patios and pool decks, slab walkways in the Urbana and Catalina style, large-format profiles like Mega-Arbel and Mega-Lafitt, and Weston Wall and Belair retaining wall block systems. We also handle re-sanding, sealing and edge restraint on existing installs.
Will service void my Belgard warranty?
Repair or installation done with the correct base preparation, compaction, joint sand and edge restraint should not void a manufacturer warranty, since those are the conditions the warranty assumes. We build to those conditions and document what we did. It’s worth checking your own warranty terms if a prior contractor did the original work.
How much does Belgard construction cost in Coral Gables?
Paver driveway installation typically runs $7,000 – $18,000, paver patio installation $3,500 – $11,000, driveway replacement $5,000 – $14,000, and driveway sealing $250 – $700. These are estimated ranges, and the written estimate sets the final price. Call (844) 797-9523 for an exact quote; estimates are free.
Do Belgard pavers need sealing in Coral Gables’ climate?
Sealing helps here, but it isn’t a cure-all. The wet season and heavy summer rain push water into joints and bedding, and a quality sealer slows absorption and helps keep polymeric sand in place. If the base is holding water, sealing the surface traps that moisture and the efflorescence comes back. Fix drainage first, then seal.
Why are my Belgard Mega-Arbel pavers rocking and spreading at the driveway edge?
Because the edge restraint has failed or was never adequate, and the base under the apron is thin or poorly compacted. Mega-Arbel is a large-format paver that takes vehicle load, and once restraint gives, the field spreads and joints open. The correction is base and restraint work, not new pavers.
Can a settled Belgard patio be repaired without replacing the whole patio?
Usually, yes. If the units are intact, the affected area can be lifted, the base re-graded and recompacted, and the pavers reset on fresh bedding and re-sanded. That’s generally cheaper and longer-lasting than replacing surface pavers alone when the real failure is underneath.
What causes white powder on my Belgard Catalina pavers?
Efflorescence: mineral salts carried to the surface by moisture and left behind as it evaporates. On Catalina slabs it often traces to poor base drainage rather than the paver. A surface wash is temporary; correcting the drainage is what stops it coming back each wet season.
Is a Belgard paver driveway better than concrete for a Coral Gables home?
It depends on what you want from the surface. Pavers handle movement and drainage better than a poured slab, and an individual unit can be lifted and reset rather than patched. Concrete costs less up front. In a city where exterior materials are reviewed and the character of the street matters, paver driveways often fit the design conversation better. Call (844) 797-9523 and we’ll walk through both against your property.
Book Your Belgard Service in Coral Gables, FL
Whether it’s a Belgard Mega-Arbel driveway losing its edge, a Catalina patio holding water, or a Weston Wall that needs drainage and geogrid corrected, we’ll diagnose the cause and quote it in writing. Free estimates, permits pulled where the work requires them, and a workmanship warranty behind the install. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Coral Gables Construction.












