







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose Unilock Construction
Coral Gables Construction is an independent installer and service provider for Unilock hardscape systems in Coral Gables, FL. We install Unilock paver driveways and patios, diagnose failing ones, and rebuild the base, bedding and edge restraint that cause most problems. We work with Unilock products weekly across Coral Gables, so we know which series hold up under South Florida sun and heavy summer rain, and how base, drainage and joint sand need to be specified. As an independent installer we are not authorized, sponsored or warranted by Unilock. We know the product line deeply and install it to the manufacturer’s published standards. Call (844) 797-9523 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Unilock pavers themselves rarely fail. The base, bedding, edge restraint and joint sand are what give out.
- A white haze, loose joints or rocking at the edges usually points to drainage, not bad pavers.
- Coral Gables’ high water table and summer rain make base prep the deciding factor in any paver job here.
- We are an independent installer, not authorized, sponsored or warranted by Unilock.
Why Trust Coral Gables Construction for Your Unilock Construction?

Our technicians have up to 12 years of experience with hardscape systems, including Unilock pavers and slabs. That experience matters most in the base. Unilock’s published standards call for a properly excavated, graded and compacted aggregate base, a level bedding layer, and edge restraint that locks the field in place. Skipping any of that is how a driveway that looks perfect in month one starts rocking in year three.
We use quality parts that fit Unilock systems: genuine Unilock-compatible edge restraints and polymeric joint sand, paired with quality aftermarket base aggregates. We don’t claim to stock or carry Unilock product, and we’re upfront that we’re not a Unilock dealer. What we do is install and repair to spec so your warranty position stays clean.
Warranty-safe practice means following the manufacturer’s installation standards rather than improvising: correct excavation depth, compaction in lifts, clean edge restraint set in concrete where the application calls for it, and joint sand applied to a dry surface. That discipline is why Coral Gables homeowners call us back for the next project. From the driveway to the roofline, we handle the trades around a paver job too, including driveway replacement and the drainage work that keeps a patio dry.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Coral Gables
Most Unilock service calls in Coral Gables trace back to one of five issues. None of them are the pavers’ fault.
- Efflorescence and white haze on Brussels Block and Beacon Hill. White mineral bloom appears when moisture migrates through a base that wasn’t compacted or drained properly and evaporates at the surface, leaving salt behind. It’s a water problem showing up on top of the pavers. Correcting it means finding where water is getting trapped under the field, not scrubbing the surface.
- Joint sand washout and paver shifting on Copthorne and Brussels Block. Polymeric sand installed over a wet or uneven bedding layer never bonds properly. Heavy summer rain then washes joints out and the field starts to move. The fix is lifting the affected area, drying and re-leveling the bedding, then re-sanding on a fully dry surface.
- Edge restraint failure and spalling at driveway aprons and pool decks. Coral Gables’ high water table and seasonal flooding push base failure fast. When the edge restraint lets go, the field spreads, joints open and corners chip. Spalling at aprons often starts with water sitting against the edge of the pavement.
- Color fade and surface chalking on Elegance slabs. Large-format slabs in full south or west sun dull faster without sealing, or with the wrong sealer. A film-forming sealer applied over a damp slab traps moisture and clouds the finish. Breathable, surface-appropriate sealing, applied only when the slab is fully dry, is what protects the color.
- Rocking and ponding at low spots. A section that rocks underfoot usually sits over a void, and a section that ponds has lost its slope. Both point back to base grading and drainage on a lot that holds water.
A driveway or pool deck of Brussels Block or Copthorne pavers often starts showing white haze, loose joints and slight rocking at the edges a few seasons after installation. The usual cause is a bedding layer that was too thin or never compacted, missing or failed edge restraint, and polymeric sand applied over a damp surface, so water sits under the pavers instead of draining. A qualified local pro typically pulls the affected field, re-grades and re-compacts the base, resets the pavers on fresh bedding, installs proper edge restraint and re-sands with polymeric sand. Sealing comes last, and only if the surface is fully dry. In Coral Gables, that sequence is a drainage job more than a paver job.
Unilock Parts & Our Repair-vs-Replace Approach

Unilock pavers are dense, well-made units. They rarely fail on their own. What fails is everything beneath and around them, which is why our repair decisions start below the surface.
Where the pavers are sound, we lift the area, rebuild and re-compact the base, reset the units on fresh bedding, install genuine Unilock-compatible edge restraint and re-sand with polymeric sand. We only replace the cracked or spalled units. That approach keeps your original field and saves you from paying for pavers you don’t need. When a section has failed repeatedly, or the base underneath is beyond correcting, a full rebuild is the honest recommendation. We’ll tell you which one you’re looking at in the written estimate, with the line items spelled out.
We don’t claim to stock OEM or genuine Unilock product. We specify parts that fit the system and hold up here. Call (844) 797-9523 to schedule your free estimate.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We walk the field, check joints for washout, test edges for movement, look for efflorescence and ponding, and probe the base at the failure point. The goal is to find where the water is going, not just what it looks like from above.
- 2
Repair or install. For a repair, we pull the affected field and rebuild base, bedding, edge restraint and joint sand to Unilock’s published standards. For a new driveway or patio, we excavate, grade for drainage, compact in lifts and set the pavers.
- 3
Test. We check slope and drainage with water, confirm joints are filled and edges are locked, and inspect the finished field for lippage before we leave.
- 4
Warranty and care. We document what was installed and how, walk you through sealing timing and joint sand upkeep, and keep the record clean so your Unilock warranty position stays intact.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Coral Gables
We install and service Unilock paver driveways using tumbled, dimensional units and large-format slab pavers. We handle paver patios, pool decks, walkways and driveway replacement. We reference the product families Coral Gables homeowners actually ask about: Brussels Block, Beacon Hill, Copthorne and Elegance. On the service side, we lift and reset fields, rebuild failed base, replace edge restraint, re-sand joints and correct drainage that’s undermining the pavement. If your driveway or patio needs the pavers pulled, the base fixed and the field reset, that’s the work we do. The pavers are usually salvageable. The base is usually what needs attention.
We Also Service These Brands
Unilock is one brand in a deep portfolio. Coral Gables Construction handles seven service categories and works with more than 50 named brands across them, including KraftMaid, Cambria, Silestone and Kohler for interior projects. That breadth means we can specify the right material for your project, not the only one we carry. Need a countertop comparison between Cambria, Silestone and Caesarstone? We can put those side by side. The same applies to hardscape: Belgard, Unilock and Tremron can all be weighed against each other.
FAQs – Unilock Construction Service in Coral Gables

No. We are an independent installer and service provider, not authorized, sponsored or warranted by Unilock. We know the product line and install to the manufacturer’s published standards, and we’re upfront about that distinction.
Yes. We use genuine Unilock-compatible edge restraints and polymeric joint sand, plus quality aftermarket base aggregates that meet the compaction and drainage requirements. We don’t claim to stock Unilock product, but the parts we use are specified to fit the system.
A joint re-sand and edge repair can usually be handled in a day. Lifting and re-basing a failed section takes longer, and a full driveway or patio install runs several days depending on size and site access. We give you the timeline in the written estimate.
Paver driveways, patios, pool decks and walkways, including tumbled, dimensional and large-format slab units. We install new and repair existing fields, and we handle drainage work that keeps them sound.
It won’t if the work follows Unilock’s published installation standards. That means correct base prep, compaction, edge restraint and dry-surface joint sand. We document what we install and how so your warranty position stays clean. If a repair is done off-spec, that’s where coverage gets complicated.
Typical estimated ranges in Coral Gables are $7,000 – $18,000 for a paver driveway, $3,500 – $11,000 for a paver patio, and $5,000 – $14,000 for driveway replacement. Those are estimates. The written line-item estimate sets the final price. Call (844) 797-9523 for an exact quote. Estimates are free.
One question we hear often: can Unilock pavers be installed over an existing concrete driveway in Coral Gables? Sometimes. It works where the concrete is sound, properly sloped and can drain, but a failed slab with ponding or cracks isn’t a candidate. The other common one: why does my Brussels Block driveway keep turning white? Efflorescence means moisture is trapped under the field, usually from an under-compacted or poorly drained base, and it won’t stop until the drainage is corrected. Do Unilock pavers need sealing in South Florida? Sealing helps protect color and slow chalking, but only on a fully dry surface with a breathable sealer. Done wrong, it traps moisture and makes things worse. And how does Coral Gables’ flooding and high water table affect a Unilock paver patio? It makes base prep and drainage the deciding factor in how long the patio lasts. A paver driveway can survive a Coral Gables HOA or historic-district review, provided the design-review submission accounts for the city’s own rules, so bring us your plans early.
Book Your Unilock Service in Coral Gables, FL
Whether it’s a new Unilock driveway, a patio rebuild or a failing field that needs the base corrected, Coral Gables Construction can handle it. Seven trades, one accountable contractor, free written estimates. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Coral Gables Construction.












