







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose ES Windows Construction
We provide independent ES Windows construction and service in Coral Gables, Florida, handling everything from impact window installation and window replacement to the roof repairs that so often get blamed on the glass. What makes our ES Windows work different is that we’re a multi-trade contractor, not a window specialist with a repair van: we can trace a leak to its real source instead of quoting a replacement when the problem lives in the flashing above the frame.
ES Windows is a Miami-Dade impact-products manufacturer, and in a city where exterior work runs through the Board of Architects, knowing the product at a hardware level matters. We are not affiliated with, authorized by, or endorsed by ES Windows. We’re an independent contractor that works on these openings and the buildings around them.
Our technicians have up to 12 years of experience. Call (844) 797-9523 and we’ll set up a free estimate.
Why Trust Coral Gables Construction for Your ES Windows Construction?

ES Windows units are impact-rated assemblies. The glass, the frame profile, the anchoring and the sealing all work as one system, and that changes how a repair has to be approached. Our technicians have learned these openings panel by panel: which roller profiles slide cleanly in an ES horizontal roller track, how an ES casement sash should close against its gasket, and where the corner joints on an impact frame tend to give first after years of South Florida sun.
We use quality parts that fit ES Windows equipment. Where the manufacturer still supplies a gasket, weatherstrip, roller or glass unit, that’s what we specify, because substituting non-rated glass or hardware on an impact-rated opening undermines the rating the product was sold on. On older profiles that are no longer available, we source aftermarket hardware that matches the original dimensions and function.
Service is warranty-aware. We document what we find, work in a way that protects the original installation’s integrity, and tell you plainly when a repair could affect coverage so you can check the terms before we start. Coral Gables Construction handles this as one accountable contractor across seven trades, so if the leak turns out to be a roof flashing detail rather than the window, we’re already the right call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ES Windows Construction Problems We Fix in Coral Gables
Most of what we see on ES Windows products in Coral Gables falls into five buckets. None of them are mysterious once you know where to look.
- Fogged or weeping insulated glass. A hazy band or a milky film between the panes means the sealed unit has lost its gas seal and moisture has entered. No amount of cleaning will fix it. The unit has to be re-glazed, and on impact products the replacement glass must carry the same rating as the original.
- Sliding impact doors that need two hands. Hard tracking, jumped rollers and sudden stiffness are almost always flat-spotted rollers plus a track packed with grit. Once the weep paths at the sill clog, water backs up and the problem gets worse. Left alone, the sill stops draining and you get intrusion at the threshold.
- Gasket, weatherstrip and corner-joint breakdown. UV and constant humidity harden the seals on an impact frame. The corner joints are the first place you’ll notice it, usually as a draft or a fine water stain at the miter. A hardened gasket stops doing its job long before it visibly cracks.
- Anchor and shim deterioration on older installs. On installations that have been in place a while, shims compress and anchors loosen. The frame racks slightly, which shows up as a window that no longer latches cleanly, a draft at the edge, or a leak at the rough opening rather than through the glass.
- Leaks misread as window failures. In Coral Gables’ subtropical rain, water that appears at the head of a window during a driving storm is frequently roof or flashing related – a lifted tile, a failed seal above the opening, a clogged drainage path. Diagnosing the source first is what prevents a replacement quote you didn’t need.
Each of these has a repair path that stops short of full replacement in most cases. The one we take seriously is compromised impact glazing on a unit whose frame is also failing; that’s usually not worth re-glazing.
ES Windows Parts & Our Repair-vs-Replace Approach

We choose parts by fit and rating, not by convenience. For ES Windows equipment, that means OEM rollers, gaskets, weatherstrip and glass units wherever the manufacturer still supplies them, and quality aftermarket hardware only for discontinued profiles. We don’t sell windows off the back of a repair, so our recommendation is based on what the unit actually needs.
The decision usually comes down to three questions. Is the frame sound? Is the impact glazing intact? Can the correct parts still be sourced? If the answers are yes, resealing, re-glazing or re-rollering is the right move and cheaper than replacement. When a frame is racked or corroded past the point of holding an anchor, or when the glass has lost its rating, full replacement is the honest answer.
On impact-rated openings, substituting non-rated glass or hardware voids the product’s rating. We won’t do it, and we’ll tell you why if someone offers to. Call (844) 797-9523 for a free estimate on the repair you’re weighing.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We inspect the unit, the surrounding opening and the roof or wall above it. Fogged glass, a stiff slider and a head-of-window leak get three different diagnoses, and in Coral Gables the roof is checked as part of the window call more often than you’d expect.
- 2
Repair or install. Depending on what we find, that means re-glazing a sealed unit, replacing rollers and re-forming a track, replacing gaskets and re-sealing a frame, or installing a new ES impact window or door with the anchoring and perimeter sealing the assembly requires.
- 3
Test. Every slider gets cycled through its full travel. Every fixed unit gets checked at the gasket line. Every repair that touched a sill gets its weep holes verified so water has somewhere to go. Where the leak source was above the opening, we confirm the repair at that level too.
- 4
Warranty and documentation. We leave you with a written record of what was replaced and what product went in, so the paper trail holds up if a warranty question comes later.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Coral Gables

We work on the full range of ES Windows residential products: ES Impact Windows, both fixed and casement units; ES Sliding Glass Doors and impact sliding doors, including re-rollering and track work; ES Aluminum Single-Hung and Horizontal Roller windows; and ES Entry and French door systems, where hinge adjustment, gasket replacement and threshold sealing are the usual jobs.
That covers installation on new openings and service on existing ones. Coral Gables construction work on these products is dominated by renovations and additions rather than new builds, so most of what we do is fitting impact assemblies into existing walls, matching the original Mediterranean Revival vernacular, and getting the anchoring and flashing right where a new opening meets an old structure.
We Also Service These Brands
Our brand roster runs well beyond any single manufacturer. Alongside ES Windows work we specify and install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, part of a portfolio of more than 50 named brand relationships across cabinetry, countertops, plumbing, roofing, windows, doors, fencing, pavers and ADU platforms. If your project touches more than the windows, you’re dealing with the same accountable contractor for all of it.
FAQs – ES Windows Construction Service in Coral Gables
No. We are an independent contractor and are not affiliated with, authorized by, or endorsed by ES Windows. We service and install their products using quality parts that fit the equipment, and we say so plainly so there’s no confusion about who backs the manufacturer’s warranty.
Yes. We specify OEM rollers, gaskets, weatherstrip and glass units wherever the manufacturer still supplies them, and quality aftermarket hardware for discontinued profiles where no OEM part exists. On impact-rated openings we don’t substitute non-rated glass or hardware, because doing so undermines the product’s rating. Call (844) 797-9523 to talk through a part for your unit.
Most single-unit repairs are completed in a day; a re-glaze or roller replacement on one door typically runs a couple of hours once the correct part is in hand. A full window replacement or a set of impact sliders across a home’s rear elevation runs longer, and the written estimate gives you the timeline for your specific job.
Impact windows, sliding glass doors and impact sliding doors, aluminum single-hung and horizontal roller windows, and entry and French door systems. That covers the residential range: installation on new openings and service on units already in place.
Not necessarily, but the details matter, and we flag anything that could affect coverage before we start. Using correct-rated parts and following proper installation practice protects the assembly. Check your warranty terms with the manufacturer if a repair is borderline; we’ll document what we do either way.
Typical estimated ranges depend on the scope. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $8000 – $25000 |
| Window Replacement | $4500 – $15000 |
| Roof Repair | $400 – $1800 |
An ES impact window with a fogged pane can often be re-glazed for less than a full unit replacement, which is why diagnosis comes first. Call (844) 797-9523 for an exact quote; estimates are free.
Often yes. A fogged pane means the insulated glass seal has failed and moisture is between the panes. The frame and sash are usually reusable, so re-glazing the sealed unit with correctly rated glass restores the window without a full replacement. If the frame is also racked or corroded, replacement becomes the better call. Call (844) 797-9523 and we’ll diagnose it.
Flat-spotted rollers and a track packed with grit and corrosion are the usual cause, often with a sill whose weep paths have clogged so water no longer drains. A qualified installer pulls the panel, replaces the rollers with the correct OEM profile, cleans and re-forms the track, then re-checks the sill weep holes and perimeter seal. If the door also leaks in driving rain, new gasketing and re-sealing the frame is usually the fix, not a new door.
Yes, on impact-rated units the hardware has to match the rating and the frame profile. Substituting a generic roller or lock can compromise the assembly’s performance and the rating the product was sold under. We source the correct OEM profile where it’s still available and match discontinued hardware precisely.
In most cases yes. Gasket and weatherstrip replacement plus re-sealing the frame and corner joints solves a draft or a leak at the frame without removing the window. Reinstallation only becomes necessary when the frame itself is failing at the rough opening. Call (844) 797-9523 for a free estimate.
It could be either, and in Coral Gables it’s frequently the roof. Water appearing at the head of a window during driving rain often traces to roof flashing, a lifted tile or a clogged drainage path above the opening rather than the window frame. Because we handle roofing as well as windows, we can trace the source before recommending a repair. That’s the whole point of one contractor across the trades.
Book Your ES Windows Service in Coral Gables, FL
Whether it’s a fogged impact unit, a slider that won’t glide, or a leak you can’t pin down, we’ll diagnose it properly and quote the repair before reaching for a replacement. Coral Gables Construction works on ES Windows products across the city, from impact windows and sliding doors to the roofing details that cause half the leaks we get called about. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Coral Gables Construction.












