







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Coral Gables Homeowners Choose Mr-Glass Construction
Coral Gables Construction provides independent Mr-Glass construction service in Coral Gables, including impact window installation, window replacement, and frameless glass shower enclosures. We’re not affiliated with or authorized by Mr-Glass. Our expertise comes from hands-on work with Mr-Glass 400 Series, 500 Series, and 600 Series products across South Florida, not from a manufacturer badge. That independence matters in Coral Gables, where the Board of Architects reviews exterior work and the city’s own building department runs the permitting, so a spec that suits a generic brochure rarely survives first review. We read the product, the historic district, and the code together. Call (844) 797-9523 to schedule a free estimate.
Why Trust Coral Gables Construction for Your Mr-Glass Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent opening, sealing, re-glazing, and re-hanging Mr-Glass windows and doors. We know how a 400 Series insulated unit behaves when its perimeter seal goes, how a 500 Series frame ages under years of subtropical humidity, and where a 600 Series slider starts to let water in at the joints before the homeowner sees a stain on the drywall.
Parts matter as much as labor. We source OEM Mr-Glass parts for critical components like glass units and frames so the fit is exact. For hardware, we use high-quality aftermarket rollers, locks, and seals when OEM availability is limited and the aftermarket equivalent meets or exceeds the original specification. We won’t force a part that doesn’t belong in your window.
Warranty-safe practice is simple to describe and easy to get wrong. We don’t drill a frame where the manufacturer didn’t intend it. We don’t substitute a sealant that fails the glazing system’s compatibility. We document the condition of the unit before and after so you have a record if a warranty question ever comes up. That approach is what Coral Gables homeowners are paying for when they hire a crew that knows the product rather than guessing at it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Coral Gables
Mr-Glass products are well-made. The failures we see are the failures any quality window and door line shows when it lives in a subtropical climate with a long hurricane season and heavy summer rain. Here’s what comes up most.
- Fogging between panes on the 400 Series. A hazy pane means the insulated glass unit’s perimeter seal has failed and moisture has entered the space between the glass. It’s a seal failure, not a cleaning problem, and no amount of wiping will fix it. The unit needs to be replaced with a properly matched insulated glass unit.
- Frame corrosion on the 500 Series. Coral Gables sits in intense humidity with salt-laden air, and metal fasteners and finishes feel it. Corrosion often starts at cut edges, at the sill, and around penetrations where the finish is thinnest. Left alone, it spreads into the frame and eventually compromises the unit’s structural performance.
- Water infiltration at joints and seals. Sliding doors and windows take water at the corners, the weep paths, and the weatherstripping when those elements age or clog. In a city that gets heavy summer rain, a small infiltration becomes a wet wall and eventually a mold problem behind the drywall.
- Hardware failure in door systems. Rollers flat-spot, locks drift out of alignment, and hinges wear after years of daily use. Most of it is serviceable if caught early. Left alone, a dragging panel stresses the frame and turns a hardware repair into a much bigger job.
- Impact-rated units that no longer seal. Coral Gables sits in South Florida’s hurricane zone, and impact glazing carries wind-load and uplift requirements. When the frame or the anchoring weakens, the unit may no longer perform to the rating it was installed under, which is a safety and code concern, not just a comfort one.
A typical job often starts with something like a homeowner noticing that a Mr-Glass 400 Series window has developed a foggy pane, which cuts visibility and signals a broken seal. A qualified local pro usually assesses the window, confirms the seal failure, and replaces the insulated glass unit with an OEM-matched Mr-Glass pane, restoring clarity and energy performance. In Coral Gables, that assessment also has to account for design-review rules if the work touches the exterior envelope in a historic district, so the fix has to be right the first time.
Mr-Glass Parts & Our Repair-vs-Replace Approach

We repair rather than replace whenever the frame and the surrounding structure are sound. A fogged insulated unit on an otherwise healthy 400 Series window is a repair. A corroded 500 Series frame with compromised anchoring is a different conversation. When multiple panes are fogged, or the frame has lost structural integrity, a full replacement usually costs less over time than chasing failures one at a time.
For replacement work, we compare the product against what the opening actually needs: impact rating, wind-load and uplift requirements, and drainage on the low-lying lots that dot Coral Gables. We don’t push a higher spec than the job calls for, and we don’t cut corners below what the code requires. Every recommendation comes with a written, line-item estimate so you can see exactly what’s being replaced, repaired, or left in place. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 797-9523 for an exact quote, and estimates are free.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We open the unit, check the seal, the frame, the hardware, and the anchoring. We test the weep paths and weatherstripping and confirm whether a fogged pane is a seal failure or a symptom of something larger.
- 2
Repair or install. For a repair, we source the OEM glass unit or the right hardware and install it to spec. For a replacement, we confirm the impact rating, wind-load performance, and code compliance with the City of Coral Gables before ordering.
- 3
Test. We operate doors and windows through a full cycle, check drainage under running water, and confirm the lock and roller alignment so a sliding panel doesn’t drag or leak.
- 4
Warranty. We document the work, the parts used, and the before-and-after condition of the unit, so a future warranty claim has a clear record behind it.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Coral Gables
We service and install Mr-Glass windows across the 400, 500, and 600 Series lines, including impact-rated units for hurricane-zone homes. We handle sliding doors and the rollers, locks, and seals inside them. We install frameless glass shower enclosures and repair or replace the glass and hardware on existing ones. We replace insulated glass units on fogged windows, correct water infiltration at joints, and address corrosion on aging frames. When the frame is sound and only the glass or hardware has failed, we repair. When the whole unit is compromised, we replace it. Coral Gables homeowners get a straight answer on which one their window actually needs.
We Also Service These Brands
Mr-Glass is one line on a much longer roster. Coral Gables Construction is a multi-trade contractor, and we specify by name, not by category. Alongside Mr-Glass, we work with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, Kohler, Toto, and Grohe fixtures, and roofing systems from GAF, CertainTeed, and Owens Corning, plus Belgard, Unilock, and Tremron pavers. One contractor, every trade, from the driveway to the roofline.
FAQs – Mr-Glass Construction Service in Coral Gables

Is Coral Gables Construction authorized by Mr-Glass? No. We’re an independent service provider, not affiliated with or authorized by Mr-Glass. Our expertise comes from hands-on installation and repair work with Mr-Glass products, not a manufacturer badge. That independence means we recommend what the window actually needs.
Do you use quality parts that fit Mr-Glass equipment? Yes. We source OEM Mr-Glass parts for critical components like glass units and frames, and high-quality aftermarket hardware when OEM availability is limited. Either way, we don’t install a part that doesn’t meet or exceed the original specification.
How long does Mr-Glass service take? A single insulated glass unit replacement is usually a short visit. A multi-window replacement takes longer, and in Coral Gables it also depends on how quickly the exterior work clears the Board of Architects and the city building department. We’ll give you a realistic timeline with the written estimate.
What kinds of Mr-Glass products do you cover? Windows across the 400, 500, and 600 Series, sliding doors and their hardware, frameless glass shower enclosures, and insulated glass unit replacement. If you’re unsure, send a photo and we’ll tell you what you’re looking at.
Will service void my Mr-Glass warranty? Warranties vary, and we recommend confirming the terms with Mr-Glass. We work in a warranty-safe way: no unapproved drilling, no incompatible sealants, and a documented record of the unit’s condition before and after. That record protects you if a claim ever comes up.
How much does Mr-Glass construction cost in Coral Gables? Typical estimated ranges are below. Every price is per job, set by a written line-item estimate, and the written estimate is what sets the final price. Call (844) 797-9523 for an exact quote, and estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
For context on the wider project, a home addition in Coral Gables typically estimates $45,000 – $130,000, a garage conversion $30,000 – $80,000, and a full ADU build $90,000 – $220,000, depending on scope and what design review requires.
Book Your Mr-Glass Service in Coral Gables, FL
A fogged pane, a sticking slider, or a frame that’s seen better days: we’ll tell you honestly whether it’s a repair or a replacement. We’re an independent Mr-Glass service provider working in Coral Gables and across South Florida. Call (844) 797-9523. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and every quote is written line-item.
Written by the team at Coral Gables Construction.












